How To Buy High Quality Energy Efficient Lighting? How To Buy Energy-efficient And Good-looking Lighting?

How to buy high quality energy saving lamps and lanterns

      Energy saving lamps are popular with consumers because of their energy efficiency and soft light. In front of all kinds of energy-saving lamps, how can consumers choose the cost-effective energy-saving lamps?

      The first thing is to choose a product from a well-known brand. Consumers can refer to the national government procurement list of qualified suppliers and select a well-known brand from it, and purchase from a shopping mall or lighting shop specialising in lighting. When buying energy saving lamps, you can also refer to the "CQC" (safety certification) and "Festival" (energy saving certification) certification marks, certified products that meet the requirements of national safety and energy saving standards, but these two certifications are voluntary participation by enterprises, not mandatory. These two certifications are voluntary and not mandatory.

      The next step is to observe the outer packaging of the product, including the product's trademark, nominal power, etc. A good energy saving lamp should have a clean appearance, no air bubbles, the phosphor coating inside the lamp should be fine, no particles, uniform white; the lamp head and the lamp should be vertical, no tilt; the contact surface between the lamp head and the power supply should be flat. The information marked on the lamp should also be clear and legible, firmly attached, with no blurring or overlapping of handwriting or patterns.

      Finally it is time to check for yourself. Consumers can power up the lamp, turn it on for 5 seconds and then turn it off for 55 seconds to observe the black and yellow filament, which is generally better without black and yellow. In addition, consumers can also observe the luminescence of the lamp at the moment of energisation. Under normal circumstances, the lamp first glows a little darkly, then after a few seconds, it suddenly becomes very bright, which has a longer service life than a lamp that becomes very bright immediately after being energised. Qualified energy saving lamps can last for more than 5000 hours in the experimental state, and must also last for more than 2000 hours in normal use, if they do not reach this standard, they are of inferior quality.

How to buy energy-efficient and good-looking lighting

      In modern home interior decoration, they are no longer satisfied with a bare energy-saving lamp, but want to use energy-saving light sources in their beautiful lamps and ornaments. However, in the face of the wide range of lighting products in the Chengdu decoration market, how can consumers buy energy-saving lamps and lanterns with decorative effects?

Energy saving or decoration sometimes cannot be achieved at the same time

      There are many beautiful lighting products that do not use energy efficient light sources. For decorative lighting such as crystal lighting, high brightness is often required to reflect the brilliance of crystal lighting. Energy-saving lamps are not yet able to achieve the desired decorative effect, so only ordinary lamp beads or ordinary light bulbs can be used.

      Therefore, when purchasing lamps and lanterns, consumers should fully consider the decorative style and energy consumption needs of their homes. While paying attention to decorative environmental protection, more energy should be saved, you can try to choose the use of energy-saving light sources of lighting, not only to achieve the best lighting effect, but also to play a role in beautifying the room, to truly achieve environmental protection and energy saving.

Decorative moderation is also a kind of energy saving

      Nowadays, lighting is a very important role in home decoration, however, to take into account energy saving and decoration, but also to do the right amount of tailor-made. The use of large lamps in very small rooms, even with energy efficient light sources, can also result in a waste of energy.

The principle of choosing a lamp for the living room is "big house with big lights, small house with small lights".

      The room height is below 3 metres, so it is not advisable to use long pendants and crystal lights with a large drape, otherwise it will hinder safety. Secondly, to adapt with the area of the room, the area of the lighting should not be larger than 2% to 3% of the room area. For example, for a foyer of 3-4 square metres, choose lamps with a diameter of 20 centimetres or less, so as not to cause the top of the foyer to be too large and give people a depressing feeling. 20 square metres of living room, the diameter of the lamps should not exceed 70 centimetres; 30 square metres of living room, the diameter of the lamps should not exceed 80 centimetres. If the lighting is insufficient, add light sources or configure other lamps to supplement.

      In addition, lighting products should be compatible with the overall decoration style. Chinese, Japanese and European style lamps should be harmonised with the surrounding decoration style in order to avoid giving the impression of clutter. For special environments such as bathrooms and kitchens, you should choose lamps with moisture and water resistant features.

-THANKS FOR WATCHING-